The maximum power input of the Mono Earphone is 250 mW RMS. Volume adjustment must take this limit into account, particularly when the Mono Earphone is connected directly to an amplified output.
Adjustment procedure
- Set the output volume of the connected device to its minimum level.
- Start audio playback.
- Slowly increase the volume to the desired listening level, keeping within the maximum power input of the Mono Earphone.
Caution: excessive power may damage the speaker. Being able to connect the Mono Earphone to an amplifier does not mean that it can handle the amplifier’s full output power.
Devices requiring particular care
The amplifiers in the following devices as capable of delivering more power than the Mono Earphone can handle:
- NanoPlayer mkII.*
- MicroPlayer mkII.*
- EventPlayer.*
- VP200HD(i) and VP250HD(i).*
- Flash mpx SD.*
- NanoAMP1.*
With these devices, always start at the minimum volume level and increase it gradually.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article