Safety instructions and physical installation

Reminder of safety instructions to follow before using and handling the controller.

WARNING: DO NOT EXPOSE TO MOISTURE OR DUST!
Unplug the power cable before any intervention!
FOR YOUR SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE STARTING YOUR AP420.

CE Marking

The CE marking is located on the nameplate, on the rear of the device. It certifies the device's compliance with the Low Voltage Directive according to European standard EN 55022, as well as the Electromagnetic Compatibility Directive 61000-4-x.

General Information

• The user manual is an integral part of the product. It must always be kept in the immediate vicinity of the device. Correct and proper use of the product implies strict adherence to the instructions contained in this manual. In case of resale of the equipment, the user manual must be handed over to the successor. Personnel must receive instructions regarding the correct use of the device.
• Only the use of original parts guarantees perfect safety for the user and correct operation of the device. Furthermore, only accessories mentioned in the technical documentation or explicitly approved by the manufacturer must be used. If accessories or consumables from other brands are used, the manufacturer cannot guarantee correct and safe operation.
• Damage caused by the use of accessories or consumables from other brands does not entitle you to any benefits under the warranty.
• The manufacturer considers itself responsible for the safety, reliability, and functionality of the product only if the assembly, adjustments, modifications, extensions, and repairs have been carried out by the manufacturer or a company authorized by the manufacturer, and if the device is used in accordance with the instructions contained in this manual.
• The controller complies with the technical safety standards in force at the time of publication. All rights reserved for electrical diagrams, procedures, names, and devices mentioned.
• Any reproduction, even partial, of the technical documentation is prohibited without written authorization from Waves System.

General Safety Instructions

This device left our facilities in perfect working condition. To preserve these conditions, ensure its safety, and avoid any risk of bodily injury, the user must imperatively follow the safety instructions and read the Attention! messages included in this manual. This device, manufactured by Waves System, is designed to practically exclude any risk when used in accordance with its intended purpose.

For safety reasons, we would like to remind you of the following instructions:

• Use the device in compliance with local legislation and regulations. Any modification or transformation of the device automatically results in the loss of approval. The commissioning of modified devices is punishable by law. In the interest of workplace safety, the operator and user are responsible for complying with the regulations.
• Keep the original packaging for possible return shipment of the product. Also, ensure it is kept out of the reach of children. Only this original packaging guarantees optimal protection of the product during transport. If return shipment of the product is necessary during the warranty period, Waves System is not liable for damage occurring during transport and attributable to defective packaging.
• This device is for playing audio and video files. It should only be used by individuals whose training or knowledge ensures correct handling.
• Before each use, the user must verify that the device is in perfect working condition.
• This product must not be used in areas where there is a risk of explosion. Furthermore, the device must not be used in an atmosphere that promotes combustion or in a humid, excessively hot, or cold place.
• Maximum operating temperature: +45°C
• Storage temperature: from 0°C to +60°C

Safety Instructions Against Electrical Hazards

• The power supply must be connected to a grounded outlet or a European outlet installed according to regulations.
• Primary power disconnection device: The power plug serves as the primary power disconnection device and must be easily accessible.
• Power supply voltage: 12V DC - 3.45 A
• Before plugging in the device, verify that the voltage and frequency indicated on the device match those of the power grid.
• Before commissioning, check that the device and cables are not damaged. Damaged cables and connections must be replaced immediately.
• Never allow power cords to come into contact with other cables. Handle the power cable as well as all cables connected to the mains with extreme care.
• Always plug in the power plug last. Ensure that the on/off switch is in the 'off' position before connecting the device to the mains. The power outlet must remain accessible after installation.
• Check the device and its power cable periodically. Unplug from the mains when you are not using the device or for maintenance.
• Handle the power cord only by the plug. Never remove the plug by pulling on the power cord.
• Electrical connection, repairs, and maintenance must be carried out by qualified personnel.
• Do not turn the device on and off in a very short period, as this could reduce the lifespan of the equipment.

	Warning, risk of electric shock
	Warning, the manual must be consulted whenever this symbol is present.
	Direct Current
	WEEE
	The manual must be consulted whenever this symbol is present.
	Positive electrical polarity

Usage Conditions

• This product is intended for indoor use only.
• The device must be installed at a height of less than 2m from the ground.
• If the device is exposed to very large temperature fluctuations (e.g., after transport), do not plug it in immediately. Condensation forming inside the device could damage it. Allow the device to reach room temperature before plugging it in.
• Do not shake the device; avoid sudden movements during installation or handling.
• When choosing the installation location for the controller, ensure it is not exposed to a major source of heat, humidity, or dust. No cables should be trailing on the floor. You would endanger your safety and that of others.