Cube offers two installation modes: VESA wall mounting for individual setups, and mosaic assembly to combine multiple units and meet higher sound pressure requirements.
Warning: Installation must be carried out by qualified personnel. Unstable mounting can cause serious injury and damage the device.
VESA Mounting
The Cube is compatible with the VESA 100×100 mm standard. The mounting bracket is not included with the device and must be purchased separately based on installation constraints.
| Parameter | Value |
|---|---|
| Standard | VESA 100×100 mm |
| Screw type | M4×6 round head |
| Hole depth | 6 mm |
| Layout | 4 points, spaced 100 mm horizontally and vertically |
Mosaic Assembly
To increase sound pressure levels and improve system adaptability, Cube units can be assembled in a mosaic configuration with other units. Two configurations are available.
Required Components for Assembly
| Component | Description |
|---|---|
| 2-panel joining piece | Connects two units side by side |
| 4-panel joining piece | Connects four units in a 2×2 grid |
| M3×5 round head screws | Secures joining pieces to the assembly holes |
2-Unit Configuration
Two Cube units are placed side by side horizontally and connected using a 2-panel joining piece, secured via the assembly holes with M3×5 round head screws.
4-Unit Configuration
Four Cube units are arranged in a 2×2 grid and connected using a 4-panel joining piece in the center, supplemented by 2-panel joining pieces on the edges. All are secured with M3×5 round head screws.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article