The Cube speaker accepts two types of audio input signals: balanced and stereo. The connection is made via the AUD IN connector and must be paired with the correct setting of the AUD MODE switch.
Important: Always disconnect the power supply before handling the connectors.
AUD IN Connector Terminals
| Terminal | Stereo Mode | Balanced Mode |
|---|---|---|
| L (BAL+) | Left channel | BAL+ signal |
| R (BAL-) | Right channel | BAL- signal |
| GND | Audio ground | Audio ground |
The audio cable gauge must be between 24 and 14 AWG.
Configure the AUD MODE Switch
Once the wiring is complete, set the AUD MODE switch according to the type of signal from your source:
| Position | Mode | Pins Used |
|---|---|---|
| BAL | Balanced | BAL+ / BAL- / GND |
| STEREO | Stereo | L / R / GND |
Warning: If the AUD MODE switch does not match the source signal type, the device will not produce sound or the audio quality will be degraded.
Compatible Audio Sources
Playback and volume control are managed from the connected source device. Compatible sources include: smartphone, tablet, computer, MP3 player, TV.
Note: Using high-quality audio files contributes to a better listening experience.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article