The Cube features five interfaces grouped on its connection panel: TRIG MODE, TRIG IN, DC IN, AUD IN, and AUD MODE.
TRIG MODE (Switch)
| Position | Behavior |
|---|---|
| ON | Continuous playback |
| HI | Active triggering on high signal |
| LOW | Active triggering on low signal |
TRIG IN (Connector)
| Terminal | Description |
|---|---|
| GND | Trigger signal ground |
| TRIG | Incoming trigger signal (DC 3.3 V) |
DC IN (Connector)
| Terminal | Description |
|---|---|
| GND | Power supply ground |
| 24V | 24 V DC / 2 A power supply |
AUD IN (Connector)
| Terminal | Stereo Mode | Balanced Mode |
|---|---|---|
| L (BAL+) | Left channel | BAL+ signal |
| R (BAL-) | Right channel | BAL- signal |
| GND | Audio ground | Audio ground |
AUD MODE (Switch)
| Position | Mode |
|---|---|
| BAL | Balanced input (BAL+ / BAL- / GND) |
| STEREO | Stereo input (L / R / GND) |
In Images
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article